View IP interfaces

Unisphere provides monitoring and management for NVMe/TCP directors, NVMe/TCP ports, NVMe/TCP endpoints, IP interfaces, and IP routes.

Steps

  1. Select a storage system that is running PowerMaxOS 10 (6079).
  2. Select System > iSCSI+NVMe and click the NVME tab to open the NVMe dashboard.
  3. Click IP Interfaces.
    The following properties display, depending on the operating environment:
    Dir:Port The combination of the physical director and associated port of the IP interface.
    Network ID The network identity of the IP interface that provides isolated IP routes.
    IP Address The destination IPv4 or IPv6 address of the IP interface.
    Prefix The network mask IPv4 or IPv6 prefix value of the IP interface.
    VLAN ID The VLAN tag number of the IP interface.
    Dir:Virtual Port The combination of the physical director and assigned virtual port or NVMe/TCP endpoint alias of the IP interface.
    Volumes The total number of volumes mapped to the NVMe/TCP endpoint attached to the IP interface.
    Maximum Transmission Unit The maximum transit size of the Ethernet packet for this IP interface.

    To see more information about a NVMe/TCP IP interface, select it and click Details icon.

    The following parameters are displayed:

    Dir:Port The combination of the physical director and the associated port of the IP interface.
    Network ID The network identity of the IP interface that provides isolated IP routes. This property can also be modified.
    IP Address The destination IPv4 or IPv6 address of the IP interface. This property can also be modified.
    Prefix IPv4 or IPv6 prefix length. This property can also be modified. You specify an IPv4 prefix length value in the range of 1 through 30. You specify an IPv6 prefix length value in the range of 1 through 128.
    VLAN ID The VLAN tag number of the IP interface.
    Maximum Transmission Unit The maximum transit size of the Ethernet packet for this IP interface. This property can also be modified.
    Dir:Virtual Port The combination of the physical director and the assigned virtual port or NVMe/TCP endpoint alias of the IP interface.
    NVMe/TCP endpoint The NVMe/TCP endpoint ID.
    Volumes The total number of volumes mapped to the NVMe/TCP endpoint attached to the IP interface.
    CDC IP Address The Centralized Discovery Controller (CDC) IP address.
    CDC Port Number The CDC port number.
    CDC Connection Status The CDC connection status. Possible values are: Pending, Established, Failed, and Unknown.
    CDC state The CDC state.
    mDNS state The Multicast DNS (mDNS) state.

    The following controls are available, depending on the operating environment: